Slik CF 730 Carbon Fibre Tripod Legs – All 700 series carbon fibre tripods have legs made up of carbon fibre material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fibre. The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.
The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.
Key features
Carbon fibre tripod legs with four twist lock leg sections
Head mounting screw
Corresponding to both U1/4 and U3/8 head mounting screws
3-steps leg angle adjustment
Leg angle adjustable from a high position to a low position
A.R.S (Anti-Rotation System)
The A.R.S. systems prevent the leg tubes from rotating inside each other making it much easier to lock and release all the twist-release locks securely
Leg lock system (crown-type) (PAT.)
Twist lock system with double nut ring crown type (PAT.)
The hook at the bottom of the centre column
Accessory hook capable of suspending a weight
Exchangeable leg tips
Leg tips can be exchanged to spike leg tips or large size rubber feet, from original rubber leg tips. “SPIKE SET U3/8” & “Rubber Feet 50mm” are sold separately as an optional accessory
Specification
Closed Length: 475mm
Leg Lock Type: Twist Lock
Leg Sections: 4
Maximum Height: 1650mm
Minimum Height: 180mm
Weight: 1.350KG
